GP2040-CE HITBOX manual and HITBOX software 11.16

besaviormanager

here is GP2040-CE HITBOX Manual ( renew on 11.07)
video manual here:  https://youtu.be/UFEz9izg9wo


Here is GP2040-CE  HITBOX firmware (11.08 renew) , user need update it's hitbox with this firmware
----------------------------------------------------------------------------------------

Note:

   1：  After update  GP2040 firmware,  user need also update p5general new firmware 11.09 to get faster speed, lower latency.
             The P5general update way is here.


   2： Some Raspberry Pi HITBOX have different USB0 setting parameters. For example, the DOIO product has USB0 set to 26.
         


        Therefore, for the specific settings of USB0, please consult your HITBOX seller(correct config for guiding function).  We suggest that users choose well-known brands to obtain good after-sales service.


    3:   The latest official firmware released by Raspberry Pi now supports P5general. Users can choose to upgrade to this official firmware to use P5general.
                    https://github.com/OpenStickCommunity/GP2040-CE/actions/runs/19370401925 (After logging in to GitHub, users can download the required HITBOX firmware.)

          Here we have downloaded one of the PICO versions for users' reference and use.


  
     We suggest that users who make their own firmware or brands develop HITBOX based on this 11.14 official firmware.




     中文用户请点击此处，到中文版块获取资料

abogard

By chance do you have the USB0 config for Haute42 Cosmox T16? I have not been able to make it work properly.

besaviormanager

abogard replied at 2025-12-14 12:08
By chance do you have the USB0 config for Haute42 Cosmox T16? I have not been able to make it work p ...

juset check your hitbox seller , to know correct set for guiding function

flaviosnk

besaviormanager replied at 2025-12-26 15:17
juset check your hitbox seller , to know correct set for guiding function

The correct set for the orientation function da hitbox Haute42 C-AT


GP2040-CE_0.7.10_Haute42COSMOX_Lite_Ultra.uf2

besaviormanager

flaviosnk replied at 2026-01-20 10:58
The correct set for the orientation function da hitbox Haute42 C-AT

one of user test haute42 already, it work.
1:  update our firmware 11.09
2:  do full same set as our manual showes, must 100% same